Mona–Intermountain scheduling path
CAISO ↔ Utah · Intertie scheduling point
CAISO’s MDWP intertie scheduling point. Its reading nets published import and export schedules across the balancing-area pairs using this point. The marker is at Mona, the 345 kV scheduling terminal shown in CAISO’s network model; the path continues through Intermountain to Adelanto.
Scheduled transfers
Compare each operator’s reading at its stated time. Scheduled transfers and metered physical flow measure different things.
- As CAISO reports it · scheduled
- 0 MW · Idle
as of Oct 15, 12:00 PM PDT
Last 30 days
Hourly readings, signed so that up is power leaving the market. Each series identifies whether it measures flow or a transfer schedule.
Above zero: CAISO → Utah. Below: the reverse.
- Usual direction
- CAISO → Utah in 0% of hours
0% out, 0% in, 100% idle across 721 hours
- Average
- 0 MW · Idle
- When busy
- 0 MW
95th percentile of hourly scheduled transfers either way
- Peak CAISO → Utah
- 0 MW
- Peak Utah → CAISO
- 0 MW
- Direction changes
- 0
Hardware
Its terminals, placed from named HIFLD substations or other cited geospatial sources where available.
- Substation
- Mona, UT
39.8240, -111.9043 · 345 kV
Sources and method
Schedules come from CAISO interface readings. Each value is shown with its operator and source time; direction is normalized from that operator’s sign convention toward or away from CAISO. A rating describes the equipment; an operator’s posted directional limit, when available, is a separate operating value. The map point identifies a sourced terminal or crossing where available, or a representative connection point; it does not trace the full route.